A38 P38 Continuous power output (20Hz—20kHz at 0.5% THD), per channel Both channels, 8Ω, 20Hz—20kHz 100W 100W Single channel, 8Ω, 20Hz—20kHz 150W 150W Both channels, 4Ω, 20Hz—20kHz 140W 140W Single channel, 4Ω, at 1kHz 200W 200W Harmonic distortion, 80% power, 8Ω at 1kHz 0.005% 0.005% Inputs Phono input (optional module): Input sensitivity 2.7mV (MM); 270μV (MC) Input impedance 47k
Ω (MM); 300Ω (MC)Ω 10kΩ
Power amplifier input Nominal sensitivity 800mV 800mV Input impedance 22k Gain 31.5dB 31.5dB Preamplifier output Nominal output level 700mV Maximum output level 2.6V RMS Output impedance <50 Headphone output Maximum output level into 600Ω 1.6V rms Output impedance 4.7 General Mains voltage 115V or 230V 115V or 230V Power consumption (maximum) 800VA 800VA Power consumption (standby) 2VA 2VA Dimensions W x D x H (including feet) 430 x 370 x 110mm 430 x 350 x 110mm Weight (net) 9.3kg 9.5kg Weight (packed) 12.2kg 12.5kg Supplied accessories mains lead CR90 remote control 4 x AAA batteries mains lead E&OE NOTE: All specification values are typical unless otherwise stated. Continual improvement policy Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice. specifications
Signal/noise ratio (CCIR) –79dB (MM); –73dB (MC)
Overload margin 35dB
Line and tape inputs:
Nominal sensitivity 250mV—2V 800mV (pre-amp. in)
Input impedance 10k
THD+n (1kHz, 0dB signal, measured 20Hz to
20kHz unweighted)
–104dB –104dB
E-16